MS 426 Swimming Pool Sealant

Package

• 260ml cartridge (Box with 12 pieces)

Colors

• Gray
• White

PROPERTIES

• Consistency: Thixotropic (doesn’t seep)
• Worktime: 20-60 min
• Hardness (DIN 53505): 25-35 Shore A
• Movement capacity: 50%
• Performance: 9.3 m (5×5 mm joint with 1:1 form factor)

NOTES

• Application temperature (surface): 5°C to 40°C
• Work temperature: -40°C to 100°C
• Storage temperature: 5°C to 35°C
• Storage life: 12 months
• For application in environments with humidity, please refer to our technical department

1 – Carry out a thorough clean of the surfaces and the joint to be filled. It should be free from dust, oil and loose particles.
NOTE: in case of maintenance, there should be no residues of sealants and silicones

2 – Glue the masking tape on the edges of the joint for a better final finish.

3 – Place the Tarucel Hard depth delimiter at the bottom of the joint.
NOTE: the tarucel must have a diameter 20% greater than the joint width.

4 – Cut the seal tube, place it on the applier, then attach the nozzle and cut it diagonally (at 45°) in the desired thickness.

5 – Apply the sealant continuously, only once.

6 – Finish with a spatula and neutral detergent.

7 – Immediately remove the masking tape, while the sealant is still fresh.

8 – Wait 72 hours to fill the swimming pool.