Its not enough to be good, it has to be different. Know our products

Resin PC 6NF + Hardener G130 Flexible polyurethane cast system for die copies

The material forms a bicomponent and elastomer polyurethane system of high durability.

Benefits

  • High flexibility
  • Easily sanded
  • Good resistance to rupture
  • Good dimensional stability

Main Applications

  • Copies of dies for sanitary ceramics
  • Application in molds for veramic dies, molds for plaster and cement

PU system for application in molds of ceramic dies. The material forms a bicomponent and elastomer polyurethane system of high durability.

 

Packaging

Resin PC 6NF – 10 kg

Hardener G 130 Blue – 1.5 kg

  • Proportion of mixture in mass: 100 : 15
  • Work time (25°C, 200 ml, 50 mm): 20 – 30 min
  • Hardness (24 hours at 25°C): 50 – 55 Shore A
  • Elongation: 170 – 250 %
  • Maximum thickness recommended: up to 10 mm

Homogenize the components before use. Add the correct quantity of hardener to the resin, and  then mix well (using plastic or metallic spatulas), avoiding the insertion of air bubbles. Apply straight afterwards, using the walls of the mold to pour, thus avoiding the insertion of bubbles by turbulent system. Errors above ± 1% in the proportions of the mixture cause problems of hardening and degradation of the polymer. With variation in the percentage the hardness can vary ± 5 – 8 Shore A. For the preparation of the surface (molds and models), see the bulletins related to the release agents.

RELATED SUBJECTS
QUESTIONS ABOUT THIS ITEM
x

Request budget for