VED-1000 Blanket

Asphalt blanket for roof repairs

ASPHALT BLANKET FOR ROOF REPAIRS

VED-1000 Hard is a blanket formed by a laminated, reflective, corrugated aluminum sheet, bonded to a high resistance polymer film through a thick layer of asphalt-rubber that is adherent to several substrates, which forms a waterproof and protecting barrier.

Request a budget

Benefits

Higher durability in market

Does not tear

Excellent aging and resistant to bad weather

Quick and easy application without the need for a blowtorch

Permanent flexibility

Applications

Suitable for sealing metal roofing

Repairs to metal tiles (galvalume and aluminum), fiber cement and concrete

Repairs of bodies for box trucks, trailers and motorhomes

Sealing in joints of gutters, flashings and masonry

Commercial Data
Technical Data
How to Use
Downloads

VED-1000

DESCRIPTION	WIDHT X LENGTH (CM X M)	U.M.	PACKAGE
VED-1000/10	10 X 10.2	PC	ROLL
VED-1000/15	15 X 10.2	PC	ROLL
VED-1000/22	22 X 10.2	PC	ROLL
VED-1000/45	45 X 10.2	PC	ROLL
VED ROLLER (ACCESSORY)	–	PC	PC
VED PRIMER (ACCESSORY)	–	PC	900ML CAN

COMPOSITION
Reflective aluminum foil, with high resistance polymer film
and asphalt rubber.

PROPERTIES
Resistance to stretching (DIN 53504): 150%
UVB ray resistance (ASTM C1257): 2000 hours

NOTES
Application temperature (surface): 13°C to 45°C
Work temperature:: -40°C to 82°C
Storage temperature:: 5°C to 25°C

Before applying VED-1000, the surfaces must be perfectly clean, dry, and free from dust and oiliness.
Cut VED-1000 in the desirable size (with scissors, stiletto or knife).
Remove the protective film and apply it to the desired location, pressing the surface of the VED-1000 and the joints with the VED-ROLLER metal roller, so that, there are no air bubbles left. At the edges, make corners of the VED-1000 round in order to decrease the likelihood of displacement.
Apply it in good weather conditions (dry surface) with temperatures above 13°C and below 45°C.
It is not recommended for areas where there are ponds or permanently accumulated water.
When there is a need of overlapping or splicing, 8 cm of longitudinal overlap (length) and 15 cm of transverse overlap (width) are required.
For application on porous substrates, such as masonry, concrete, fiber cement, raw wood and rusty metal, VED-PRIMER (asphalt primer paint) must be applied beforehand, waiting 6 hours for the paint to dry before applying the blanket.