PC 6NF Resin + G130 Hardener
PC 6NF Resin + G130 Hardener
Flexible cast polyurethane system for copying matrices
The material forms a high durability bicomponent and elastomeric polyurethane system.
Benefits
High flexibility
Easy to sand
Good breakage resistance
Good dimensional stability
Applications
Copy of matrices for sanitary ceramic
Application in molds for ceramic matrices, plaster and cement molds
Package
Resin PC 6NF – 10 kg
G 130 Blue Hardener – 1.5 kg
- Mass mixing ratio: 100 : 15
- Worktime (25°C, 200 ml, 50 mm): 20 – 30 min
- Hardness (24 hours at 25°C): 50 – 55 Shore A
- Stretching: 170 – 250 %
- Maximum recommended thickness: up to 10 mm
Homogenize compounds before using. Add the correct amount of hardener to the resin, then mix it well (using plastic or metal spatulas), avoiding the insertion of air bubbles. Apply it right away, using the walls of the mold to let it leak, in order to avoid the insertion of bubbles by turbulent regime. Errors above ± 1% in the mixture proportions should cause problems to polymer hardening and degradation. With percentage variation, the hardness can vary ± 5 – 8 Shore A. For surface preparation (molds and models), refer to bulletins for release agents.
Related Products
Conheça Nossos Produtos
Budget for Company
Do you want to buy for CNPJ? Click the button below and speak to one of our experts.
Request a quoteFind a Store
We are present throughout Brazil, click the button below and find the store closest to you.
Find storeBuy Online
You can buy directly from our online store and receive it at your home. More comfort and agility for you.
Go to online storeNotícias Relacionadas
[CASE] How Solbras increased productivity in the installation of mini photovoltaic power plant plates and systems and had a leap in quality
Learn how Solbras, from small changes, had an increase in the productivity of the installation of plates and mini photovoltaic power plant systems, further increasing the quality of its services. Client: Operating throughout Brazil, Solbras develops and offers the best...
Saiba mais
4 minutos de leitura
4 reasons to replace aluminum with Polyurethane Plates (Cibatool) in foundry
The production of models, molds and core boxes is part of the daily routine of any foundry. These items can be produced with the most varied materials, the most popular being aluminum. But is this the best raw material for...
Saiba mais
5 minutos de leitura
[CASE] Petrus Empreiteira conquers grouting and roof waterproofing in São Paulo/SP much more agile with Grout Infinity and Waterproofing Flexpren
Read this history and see how Petrus Empreiteira used Grout Infinity and Flexpren Waterproofing to complete these stages of a work in São Paulo/SP much faster. Important! Also gaining in quality and reliability of the final result of the application. ...
Saiba mais
4 minutos de leitura
[CASE] Projefer repairs metal rail 600% faster with Mortar FR 117
Stopping the production line because of a floor repair no longer has to be a problem. Do like Projefer, who used FR 117 Mortar in maintenance and managed to clear the place 600% faster. Keep reading for details! Client: Located...
Saiba mais
4 minutos de leitura
How to make casting templates and negatives 24 times faster
Did you know that the production of casting models and negatives can be up to 24 times faster? This is possible if you replace the conventional reproduction system with Resin PC 26 + Hardener G 226. This reduction in service...
Saiba mais
3 minutos de leitura
4 evaluation criteria to choose the facade sealant
Choosing the sealant for the facade of your venture is essential to ensure the safety and durability of the entire structure. For this reason, when you're deciding, it is important to pay attention to some criteria, in order to avoid...
Saiba mais
6 minutos de leitura