Infinity Swimming Pool Grout
Hybrid grout for swimming pools – ICOM technology
Infinity Swimming Pool Grout
The Infinity Swimming Pool Grout is a hybrid, composite-based, ultra-thin grout, suitable for applications in mosaic pools. It can be applied to leaks from 1 to 4 mm thickness. Extra chlorine resistant, providing greater longevity for your pool. It has anti-mold and anti-fungal additives, and is also completely waterproof. All of this to provide a product with the lowest maintenance cost in its category.
Resistente al cloro
Surprise yourself with the lowest maintenance cost in its category. Due to its unique composite, its resistance is unparalleled. It is more longevity to your swimming pool.
Anti-fungus and anti-mold
Its 100% waterproof composition with additives fight fungi and mold, providing greater durability to the grout.
Quick and easy to apply
Application, finishing, and cleaning. These 3 steps are enough to have an easy application and an extremely smooth finishing.
Hard Group
The Hard Group has been operating in the construction segment for more than 35 years, its headquarters are located in Joinville – Santa Catarina.
Benefits
Lowest maintenance cost in its category
Extra chloride resistant
100% WATERPROOF
Extremely smooth finishing
ANTI-FUNGUS AND ANTI-MOLD
Flexible
Quick and easy to apply (2x faster than cement and acrylic grouts and 4x faster than epoxy grouts).
ULTRA THIN – Can be applied to 1mm leaks.
Applications
Mosaic pools
Swimming pools with porcelain tiles
Swimming pools with non-slip ceramics
Heated pools
Reflecting pools
Fountains
Package
- 400ml cartridge – provided with nozzle for application
| INFINITY FOR SWIMMING POOLS | |||||
| Porcelain tile dimensions | Leak width | ||||
| Dimensions (W x L) | 1 mm | 1.5 mm | 2 mm | 3 mm | 4 mm |
| 30 x 30 cm | 7-7.5 m² | 4.5-5 m² | 3-3.5 m² | 2-2.5 m² | 1.5-2 m² |
| 20 x 20 cm | 6-6.5 m² | 4-4.5 m² | 3-3.5 m² | 1.9-2.3 m² | 1.4-1.7 m² |
| 15 x 15 cm | 4.5-5 m² | 3-3.5 m² | 2-2.5 m² | 1.4-1.7 m² | 1-1.3 m² |
| 10 x 10 cm | 3-3.5 m² | 2-2.4 m² | 1.5-1.8 m² | 1-1.2 m² | 0.8-1 m² |
| 5 x 5 cm | 2.3-2.7 m² | 1.5-1.8 m² | 1-1.2 m² | 0.8-1 m² | 0.5-0.8 m² |
Colors:
- Chemical Base: Hybrid grout with ICOM technology
- Worktime: 20 – 40 min.
- Curing Time: 6 to 10 hours
- Application Temperature (surface): 5°C to 35°C
- Liberation for light traffic and contact with water: 10 hours
- Liberation for heavy traffic: 24 hours
- Storage life: 24 months
 |
1. Leak must be 2 to 3 mm deep. To do so, in case of reconstruction, remove the old grout with the Hard Grout Extractor. |
 |
2. In case of new flooring, remove excess mortar with the Hard Leak Cleaner. |
 |
3. Afterwards, do not forget to clean the dust with a brush or vacuum cleaner. |
 |
4. For rough floors, apply the Hard Grout Release Agent on both sides of the leak. To prevent the release agent from entering the leak, always do it longitudinally. |
 |
5. Remove the cartridge cap and connect the nozzle. After that, place the cartridge into apply position and cut the nozzle at 45º. |
 |
6. Discard 15 cm of the product. |
 |
7. Then apply grout to the leak evenly. |
 |
8. Immediately afterwards, perform the finishing process in continuous lines, while applying pressure with the Hard Finishing Spatula. |
 |
9. After 8 hours, remove the burrs using the Hard Cleaner Spatula. |
 |
10. And it’s done! Your application is complete. |
Online calculator
Online calculators that simplify the calculation of the quantity of products to be used in the project and/or construction.
Calculate now
Related Products
Conheça Nossos Produtos
Leakage Cleaner for Tile Grout
Tile Grout Extractor
Finishing Spreader for Tile Grout
Demolding Agent for Tile Grout
Frequently Asked Questions
Once Infinity is porosity-free, there is no build-up of dirt or staining. Therefore, it is very easy to clean, can be done with just water, and does not need aggressive products. That’s why, the use of bleach is not recommended for cleaning Infinity grout, as it may alter its color.
Yes, you can. Now it is easy to apply grout to rough coatings. You will only have to apply a release wax on both sides of the laying joint before applying your Infinity Grout. It is important that the release agent does not penetrate the joint, so always apply it lengthwise. By doing it, in the final finishing stage, you will have no problem removing the burrs.
We have a Grout Remover available in our Infinity line, to learn more, access click here. Remember that if your coating is completely smooth, this step is not necessary. Watch the video below to learn how to use the Infinity line products correctly.
Did you apply Infinity grout and there was product left in the tube? Don’t worry! You can store your grout to use again later. You will just have to be careful when storing your product.
After opening the material, store the lid for closing the grout later. Remember to discard the mixing nozzle after use, as the Infinity Grout cures in there. Store the tube in a dry, clean environment at temperatures between 10°C and 25°C. It is also important to keep the product away from heat sources.
Since Infinity Grout cures inside the mixing nozzle, to reuse the product, you need extra nozzles. This item is available in our virtual store, check it out click here.
Budget for Company
Do you want to buy for CNPJ? Click the button below and speak to one of our experts.
Request a quoteFind a Store
We are present throughout Brazil, click the button below and find the store closest to you.
Find storeBuy Online
You can buy directly from our online store and receive it at your home. More comfort and agility for you.
Go to online storeRelated News
[CASE] How Solbras increased productivity in the installation of mini photovoltaic power plant plates and systems and had a leap in quality
Learn how Solbras, from small changes, had an increase in the productivity of the installation of plates and mini photovoltaic power plant systems, further increasing the quality of its services. Client: Operating throughout Brazil, Solbras develops and offers the best...
Saiba mais
4 minutos de leitura
4 reasons to replace aluminum with Polyurethane Plates (Cibatool) in foundry
The production of models, molds and core boxes is part of the daily routine of any foundry. These items can be produced with the most varied materials, the most popular being aluminum. But is this the best raw material for...
Saiba mais
5 minutos de leitura
[CASE] Petrus Empreiteira conquers grouting and roof waterproofing in São Paulo/SP much more agile with Grout Infinity and Waterproofing Flexpren
Read this history and see how Petrus Empreiteira used Grout Infinity and Flexpren Waterproofing to complete these stages of a work in São Paulo/SP much faster. Important! Also gaining in quality and reliability of the final result of the application. ...
Saiba mais
4 minutos de leitura
[CASE] Projefer repairs metal rail 600% faster with Mortar FR 117
Stopping the production line because of a floor repair no longer has to be a problem. Do like Projefer, who used FR 117 Mortar in maintenance and managed to clear the place 600% faster. Keep reading for details! Client: Located...
Saiba mais
4 minutos de leitura
How to make casting templates and negatives 24 times faster
Did you know that the production of casting models and negatives can be up to 24 times faster? This is possible if you replace the conventional reproduction system with Resin PC 26 + Hardener G 226. This reduction in service...
Saiba mais
3 minutos de leitura
4 evaluation criteria to choose the facade sealant
Choosing the sealant for the facade of your venture is essential to ensure the safety and durability of the entire structure. For this reason, when you're deciding, it is important to pay attention to some criteria, in order to avoid...
Saiba mais
6 minutos de leitura