Ceramic Linning

Package

• Ceramic Lining Resin (1.500 kg)
• Ceramic Lining Hardener (0.150 kg)

• Mixing ratio in mass (g) to each 100 g of resin, 10 g of hardener.
• Maximum work temperature: 110°C
• Work time at 25°C: 15 minutes
• Total cure at 25°C: 72 hours
• Silicon carbide fine grains

Processing instructions

The surface to be coated with Ceramic Lining should be clean, sanded and preferentially dry-sandblasted to obtain a good resin adherence. On locations where the product adherence is not desired, apply two layers of demolding Z 15 LC. The Ceramic Lining hardener should be added to the Ceramic Lining resin and both components should be mixed together, using a metallic spreader. For larger quantities, mechanical homogenization is recommended. It is essential to obtain a homogeneous mixture. After homogenized, the product can be applied on the desired location using a brush or spreader. When the room temperature or parts temperature are below 15ºC, apply a heating source to heat the parts and the resin at a temperature of at least 25ºC. This procedure will allow the resin to perfect cure and will consequently promote the maximum mechanical strength.

PPEs

During the product handling, the work site should be well-ventilated, clean, and safe Use PVC or latex gloves, protection goggles, and apron at the moment of the product application.