HARD GAS CELL
Material: Liquefied propane-butane gas
Yield: 1.000 fasteners
DESCRIPTION |
APPLICATION |
QTY. PER PACKAGE (PIECE) |
|
Gas cell |
Suitable for the pin fastener tools models
HARD GT 90, AG and C3 |
1 |
|
|
|
|
TAPERED WASHER FOR MASONRY MOORING
Material: Galvanized steel
Recommended Pin: 3,0 x 19 mm and 3,0 x 22 mm
DESCRIPTION |
APPLICATION |
QTY. PER PACKAGE (PIECE) |
|
Tapered washer
23 mm |
Screens and masonry mooring attachment |
250 |
|
|
|
|
CHAIR CLIP FOR DRYWALL LINING
Material: Galvanized steel
Recommended Pin: 3,0 x 19 mm and 3,0 x 22 mm
DESCRIPTION |
APPLICATION |
QTY. PER PACKAGE (PIECE) |
|
Chair clip |
Plaster ceiling and drywall installation |
1400 |
|
|
|
|
STICK-E WASHER
Material: Galvanized steel
Recommended Pin: 2,6 x 19 mm and 3,0 x 19 mm
DESCRIPTION |
APPLICATION |
QTY. PER PACKAGE (PIECE) |
|
Stick-E Washer 1/2” |
Screens and metallic clamps attachment |
500 |
6000 |
Stick-E Washer 1” |
Screens and metallic clamps attachment |
100 |
5000 |
HARD MAGNETIC RING
DESCRIPTION |
APPLICATION |
QTY. PER PACKAGE (PIECE) |
|
Magnetic Ring |
Suitable for the pin fastener tools models HARD GT 90, AG, C3 and C5 |
1 |
CHAIR-TYPE CLIP, STICK-E WASHER and TAPERED WASHER:
- Material: Carbon Steel
- Finishing: White Galvanized
- Layer Thickness: 5 microns
- Corrosion resistance in Salt-Spray¹: 48 hours
¹Standards ASTM B117, ABNT NBR 8094 and SIN 50021 (red corrosion).
GAS CELL:
- Consumption 1 gas cell: 1000 pins
- Suitable for tools Hard T90/ AG e C3
GAS CELL:
Step 1) Remove the safety seal from the gas cell.
Step 2) After removing the safety seal, the gas cell should be coupled in the tool compartment.
Step 3) Push the safety lock and feed the magazine with the pins (available for a maximum of 40 pins – 4 combs).
Step 4) Couple the battery on the tool housing.
Step 5) Press the tool against the substrate to release the equipment safety lock, and then press the trigger to perform the release.